05.12.15
Dublin, Ireland-based Medtronic plc has earned U.S. Food and Drug Administration for its Arctic Front Advance ST cryoablation catheter, which treats patients with drug refractory, recurrent, symptomatic paroxysmal atrial fibrillation.
The Arctic Front Advance system is made up of several parts: the cryoballoon, which isolates the pulmonary veins for the treatment of atrial fibrillation; the Flexcath Advance steerable sheath, which helps deliver and position the cryoballoon in the left atrium; the Achieve mapping catheter, an intra-cardiac electrophysiology recording catheter used to assess pulmonary vein isolation when treating paroxysmal atrial fibrillation; the Freezor Max cardiac cryoablation catheter, which is a single-point catheter used to provide additional ablations as needed; and the Cryoconsole, which houses the coolant, electrical and mechanical components that run the catheters during a cryoablation procedure.
In Europe, where the cryoballoon has a broader indication, the device has received CE mark for the treatment of patients with atrial fibrillation. The third-generation cryoballoon has a 40 percent shorter tip than the previous generation, designed to help physicians visualize ablation success in real-time with the Achieve Mapping Catheter, as well as allow increased maneuverability for accessing some pulmonary vein anatomies.
The first patient was recently treated with the Arctic Front Advance ST cryoballoon by Karl-Heinz Kuck, M.D., director of cardiology at Asklepios Klinik St. Georg, Hamburg, Germany. The product will be broadly available to physicians in fall 2015 following a limited market release.
The Arctic Front Advance ST cryoballoon is used in a minimally invasive procedure to isolate the pulmonary veins, which are a source of erratic electrical signals that cause atrial fibrillation. The device uses coolant rather than heat (radiofrequency). Cryoballoon technology is associated with shorter procedure times than point-by-point radiofrequency ablation, and better treatment outcomes than drug therapies on the market, Medtronic claims. The Arctic Front Advance system has been shown to improve quality of life for patients and significantly reduce paroxysmal (sporadic) atrial fibrillation symptoms, with patients experiencing reduction in atrial fibrillation episodes, palpitations, fatigue, rapid heartbeat, swelling, and syncope, and has become a widely adopted treatment for atrial fibrillation.
“I have had the opportunity to utilize the cryoballoon technology since its inception more than a decade ago,” said Kuck. “By building upon clinical feedback from physicians worldwide, the third-generation system offers the potential for more real-time data and even better maneuverability that may further enhance the procedure.”
“The next-generation Arctic Front Advance ST cryoballoon builds upon the successful performance of the Arctic Front Advance System, and its shorter tip was designed in response to physicians’ needs in a real-world, clinical setting,” said Reggie Groves, vice president and general manager of the Atrial Fibrillation Solutions business, part of the Cardiac and Vascular Group at Medtronic.
The Arctic Front Advance system is made up of several parts: the cryoballoon, which isolates the pulmonary veins for the treatment of atrial fibrillation; the Flexcath Advance steerable sheath, which helps deliver and position the cryoballoon in the left atrium; the Achieve mapping catheter, an intra-cardiac electrophysiology recording catheter used to assess pulmonary vein isolation when treating paroxysmal atrial fibrillation; the Freezor Max cardiac cryoablation catheter, which is a single-point catheter used to provide additional ablations as needed; and the Cryoconsole, which houses the coolant, electrical and mechanical components that run the catheters during a cryoablation procedure.
In Europe, where the cryoballoon has a broader indication, the device has received CE mark for the treatment of patients with atrial fibrillation. The third-generation cryoballoon has a 40 percent shorter tip than the previous generation, designed to help physicians visualize ablation success in real-time with the Achieve Mapping Catheter, as well as allow increased maneuverability for accessing some pulmonary vein anatomies.
The first patient was recently treated with the Arctic Front Advance ST cryoballoon by Karl-Heinz Kuck, M.D., director of cardiology at Asklepios Klinik St. Georg, Hamburg, Germany. The product will be broadly available to physicians in fall 2015 following a limited market release.
The Arctic Front Advance ST cryoballoon is used in a minimally invasive procedure to isolate the pulmonary veins, which are a source of erratic electrical signals that cause atrial fibrillation. The device uses coolant rather than heat (radiofrequency). Cryoballoon technology is associated with shorter procedure times than point-by-point radiofrequency ablation, and better treatment outcomes than drug therapies on the market, Medtronic claims. The Arctic Front Advance system has been shown to improve quality of life for patients and significantly reduce paroxysmal (sporadic) atrial fibrillation symptoms, with patients experiencing reduction in atrial fibrillation episodes, palpitations, fatigue, rapid heartbeat, swelling, and syncope, and has become a widely adopted treatment for atrial fibrillation.
“I have had the opportunity to utilize the cryoballoon technology since its inception more than a decade ago,” said Kuck. “By building upon clinical feedback from physicians worldwide, the third-generation system offers the potential for more real-time data and even better maneuverability that may further enhance the procedure.”
“The next-generation Arctic Front Advance ST cryoballoon builds upon the successful performance of the Arctic Front Advance System, and its shorter tip was designed in response to physicians’ needs in a real-world, clinical setting,” said Reggie Groves, vice president and general manager of the Atrial Fibrillation Solutions business, part of the Cardiac and Vascular Group at Medtronic.