Prototyping at the Micro Level—A Medtech Makers Q&A
Miniaturized device components require a specialist to ensure both fabrication and prototyping success.
R&D & Design
-
R&D & Design
Building Strong Partnerships Between Medtech and Surgeon-Learning Platforms
This article offers use cases where surgeons’ education and medical technology companies go hand in hand, offering unique collaboration opportunities.Jonathan Jesneck, Ph.D., M.S., Co-Founder, Firefly Lab 07.19.22
-
R&D & Design
Making Space for Medical Device Innovation
There are plenty of thoughts and words that discuss strategies for developing innovative medical devices.Kenneth MacCallum, P.Eng., Principal Engineering Physicist, StarFish Medical 07.19.22
-
Contract Manufacturing | R&D & Design
Resonetics Buys Agile MV, a Product Development and Assembly Firm
Expands capabilities with leader serving the high-growth electrophysiology and cardiology catheter market.Sam Brusco, Associate Editor 06.13.22
-
Contract Manufacturing | R&D & Design
Resolution Medical Acquires Preclinical CRO LifeTec
LifeTec focuses on investigation and demonstration of medical device innovations, procedural skills training using biosimulation systems.Sam Brusco, Associate Editor 06.10.22
-
R&D & Design
Product End-of-Life Risk Management: Minimizing Liabilities
A priority for medical device companies.Online Exclusives Farida Ali, CEO and President of Dynamic Technology Solutions 06.03.22
-
R&D & Design
4 Ways to Align Product Development with Investor Milestones
Aligning all technical activities around the investor gates typically means, the whole company must be aligned around lean startup milestones.Scott Phillips, Founder and CEO, StarFish Medical 06.01.22
-
Contract Manufacturing | R&D & Design | Surgical
Biomerics Opens First European Facility
Galway, Ireland-based facility dedicated to balloon and balloon catheter development and manufacturing.Sam Brusco, Associate Editor 06.01.22
-
R&D & Design
-
R&D & Design
Virtual Pediatric Innovation Startup Demo Day to Commence May 19, 2022
The event will showcase companies that are advancing products ‘to solve big problems for the smallest patients and their families.’Charles Sternberg, Associate Editor 05.09.22
-
R&D & Design
OEMs Are Demanding Designs that Challenge Suppliers
Innovative technologies enable outsourcing providers to offer design solutions to OEMs with complex requirements.Mark Crawford, Contributing Editor 05.02.22
-
R&D & Design
How to Tune Up Your Outsourcing Strategy
An engineering firm must know the project’s scope to estimate properly.Steve Maylish, Chief Commercial Officer, Fusion Biotec 05.02.22
-
R&D & Design
Patient-Developed Medtech: A Success Story
Fed up with the regular hospitalizations and soiled shirts, Andy Williams designed a protective device for feeding tubes.Michael Barbella, Managing Editor 04.01.22
-
R&D & Design
Recent Trends in Self-Administration Drug Delivery Systems
New technologies provide better mechanisms for drug delivery and patients can request a safer and more convenient way to receive their medications.Philip Remedios, Principal and Design Director, BlackHägen Design 04.01.22
-
Cardiovascular | R&D & Design
NAMSA to Buy Preclinical Research Firm Medanex
Medanex's cardiovascular surgeons and staff guide clients through preclinical study design.Sam Brusco, Associate Editor 03.30.22
-
R&D & Design
More Effective Medical Device Development
Tips for successful design and development collaboration.Online Exclusives Bruce Johnston, Senior Software Engineer, MedAcuity, Mike Kropp, Senior Software Engineer, MedAcuity 03.25.22
-
R&D & Design
NAMSA to Acquire Medtech CRO ÅKRN
ÅKRN is especially known for its expertise in cardiovascular research.Sam Brusco, Associate Editor 03.22.22
-
Digital Health | R&D & Design
Accelerating Product Development in the Age of Digital Innovation
Answering frequently asked questions for medical device manufacturers.Online Exclusives Ralph Hugeneck, Head of Engineering and Technology, Jabil Healthcare 03.04.22
-
R&D & Design
How to Improve Medical Device User Experience
Better user experience ensures better treatments and patient outcomes.Online Exclusives Vincent Hua, Marketing Manager at TSINFA 02.15.22
-
3D/Additive Manufacturing | R&D & Design
3D Printing in Dentistry: Now and the Future
Prosthetic dentistry is the main focus of 3D printing applications.Online Exclusives Nathan Muller, Mechanical Engineer, StarFish Medical 02.09.22
-
R&D & Design
Medtech Research and Development Explores Remote and Digitized Healthcare
Medtech research and development is adapting to an evolving healthcare environment growing more sophisticated by mobile technology and virtual solutions.Michael Barbella, Managing Editor 02.07.22
