3D/Additive Manufacturing
-
3D/Additive Manufacturing | Cardiovascular | Surgical
3D-Printed, Lifelike Heart Models Could Help Train Future Surgeons
The heart model was structurally accurate and reproducible.Videos American Chemical Society
-
3D/Additive Manufacturing | Surgical
Biodegradable 3D Printed Stents Treat Esophageal Inflammation
Stent with esophageal-derived bioink helps treat radiation esophagitis.POSTECH 11.12.20
-
3D/Additive Manufacturing
The Printed World: Additive Manufacturing in Medtech
Medical additive manufacturing experts discuss key factors impacting the market both during and post-pandemic.Sam Brusco, Associate Editor 11.04.20
-
3D/Additive Manufacturing
Additive Manufacturing: Debinding Fluids Must-Haves
As the pressure to produce more complex biomedical parts increases, medical device manufacturing using 3D printing is gaining widespread acceptance.Venesia Hurtubise, Technical Chemist, MicroCare Medical 11.04.20
-
3D/Additive Manufacturing | Cardiovascular
First-Ever Living, 3D-Bioprinted Aneurysm to Test Surgical Treatments
Represents a significant step to developing patient-specific care for aneurysms.Lawrence Livermore National Laboratory 10.21.20
-
3D/Additive Manufacturing | Materials
AI Could Expand Healing with Bioscaffolds
Rice engineers use machine learning to speed bioscaffold development.Mike Williams, Rice University 09.24.20
-
3D/Additive Manufacturing | Software & IT
4 Ways the IIoT Improves Medical Manufacturing
The Industrial Internet of Things is expected to register annual growth of around 24 percent between now and 2023.Online Exclusives Megan Ray Nichols, Science Writer; Editor, Schooled By Science 09.02.20
-
3D/Additive Manufacturing
FATHOM and Abiogenix Bridge Swab Gap With 3D Printed Devices
FATHOM will have the ability to scale production of testing swabs from 100,000 to millions.PR Newswire 05.04.20
-
3D/Additive Manufacturing
Engineers, Oregon Medical Team Design 3D-Printed Ventilator Requiring No Electricity
The compact, mobile, and inexpensive ventilator is awaiting FDA authorization for emergency use.University of Central Florida 05.01.20
-
3D/Additive Manufacturing
3D Printing Industry Answered Call to Arms Against COVID-19
The AM community has responded with a pledge to support the production of vital medical equipment for hospitals tackling the pandemic.GlobalData 04.29.20
-
3D/Additive Manufacturing
Engineers Share 3D-Printed Ventilator Adapter Design
Available to the public to help during the coronavirus pandemic.Binghamton University 04.24.20
-
3D/Additive Manufacturing | Diagnostics
3D-Printed Swabs Could Help Fill Gap in COVID-19 Test Kits
Clinical trials expected to begin by the end of this week.University of Louisville 04.17.20
-
3D/Additive Manufacturing
3D Printing Collaboration Network Launched to Centralize Respirator Mask Production
Website provides STL files for the 3D printing of the Montana Mask, the Prusa Face Shield and USF's Nasopharyngeal Swabs.PR Newswire 04.15.20
-
3D/Additive Manufacturing
UCLA Bioengineers Create Reusable COVID-19 Face Shields
Device’s headband can be mass-produced using 3D injection molding; clear plastic shield is made by laser cutting.Brianna Aldrich and Christine Wei-li Lee, UCLA Newsroom 04.08.20
-
3D/Additive Manufacturing
Materialise's 3D Printed Oxygen Mask Helps Ventilator Shortage
COVID-19 solution brought to hospitals quickly and in full compliance with safety regulations.Videos Materialise
-
3D/Additive Manufacturing | Neurological
3D Printed Soft, Rubbery Brain Implants
Technique may enable speedy, on-demand design of softer, safer neural devices.Massachusetts Institute of Technology 03.30.20
-
3D/Additive Manufacturing
Risks of Using 3D Printing to Make Personal Protective Equipment
There are a lot of issues with certain types of 3D printed parts with respect to their use in a clinical setting.Mary Beth Gallagher, Department of Mechanical Engineering, Massachusetts Institute of Technology 03.27.20
-
3D/Additive Manufacturing
3D Printing Helps Retrofit and Build Ventilators
Students, staff, and faculty address one of the key challenges of the COVID-19 outbreak.Videos UC San Diego Jacobs School of Engineering
-
3D/Additive Manufacturing | Machining & Laser Processing
DIY Medical Devices, Protective Gear Fuel Battle Against COVID-19
Faculty and students at Georgia Tech have designed a quick and easy way to manufacture face shields.Videos Georgia Tech College of Engineering
-
3D/Additive Manufacturing
Handheld 3D Skin Printer Could Heal Large, Severe Burns
Skin printer works like a paint roller, depositing bio-ink that speeds up wound healing.University of Toronto Faculty of Applied Science & Engineering 02.05.20
