Leveraging Engineer-to-Engineer Communication with the Lightspeed Lab—A Medtech Makers Q&A
Collaboration is enhanced when engineers from the OEM and supply partner can communicate seamlessly on new projects.
R&D & Design
-
Packaging & Sterilization | R&D & Design
How Human Factors Engineering Can Contribute to Medical Device Packaging
Packaging must be a focus at the early stages of product design and considered throughout each phase of the development continuum.Jeff Morang, Director of Human Factors Engineering, BlackHägen Design 06.06.23
-
R&D & Design
Human Factors and Usability Regulation: Embracing the Value in Regulatory Guidance
Helping device manufacturers avoid the common mistakes that send development projects off the rails.Bruce Johnston, Ph.D., Lead Solution Architect, MedAcuity 06.06.23
-
R&D & Design
RQM+ Buys Full-Service CRO Libra Medical
Libra Medical offers regulatory affairs, clinical operations, and quality assurance services.Sam Brusco, Associate Editor 05.10.23
-
R&D & Design
How to Use Your Technical Team to Determine Product-Market Fit
Are there approaches to product development that minimize the risk of failure while maximizing opportunity?Scott Phillips, Founder and CEO, StarFish Medical 05.09.23
-
R&D & Design
Computer Concepts for Medical Device Design
Software and advanced digital tools provide developers the tools needed for extremely rapid iterations of device ideas.Mark Crawford , Contributing Editor 05.09.23
-
R&D & Design
Optimizing UX for the Internet of Medical Things
Keeping abreast of patient and provider needs.Online Exclusives Amanda Winstead, Freelance Writer 05.03.23
-
R&D & Design
-
R&D & Design
Designing for Manufacturing: 5 Common Startup Mistakes (and How to Avoid Them)
To make sure your device has the best chance of success, review these common startup mistakes, and learn how to avoid them.Online Exclusives Jim Kasic, Founder and Chairman, Boulder iQ 03.27.23
-
Diagnostics | R&D & Design
Design Innovations Fuel Advancements of Next-Gen Diagnostic Wearables
Survey results reveal diagnostic wearable technology is ready and barriers to innovation can be overcome—it’s just a matter of timeOnline Exclusives Tyson Masar, Global Director, Medical Sales, Molex 02.14.23
-
R&D & Design
How to Incorporate the UX Factor in Medical Device Design
User expectations in medtech's mission-critical environment have encouraged further advancements in technology and procedural improvements.Philip Remedios and Irina Samkova, BlackHägen Design 02.03.23
-
R&D & Design
Medtech R&D Teams Must Be Creative & Resilient to Survive
Traditional R&D processes are falling out of favor as medtech firms rethink their innovation strategies for the post-pandemic era.Michael Barbella, Managing Editor 02.03.23
-
R&D & Design
Overcoming Implicit Bias in Medical Product Development
The key to overcoming bias is recognition, acknowledgment, and proactive action.Online Exclusives Amanda Winstead, Freelance Writer 12.15.22
-
Contract Manufacturing | Diagnostics | R&D & Design
Veranex Acquires Fusion Biotec to Accelerate Diagnostic Solutions
Fusion Biotec is a design and engineering firm for complex electromechanical diagnostic instrumentation and medical devices.Sam Brusco, Associate Editor 12.13.22
-
Contract Manufacturing | R&D & Design
SteriPack Buys Kinneir Dufort to Boost Design Capabilities
Kinneir Dufort is a U.K.-based user-centered design and product development firm.Sam Brusco, Associate Editor 12.06.22
-
Diagnostics | R&D & Design
Mitigating Bubbles in Microfluidics
Bubbles can have a significant impact on process performance and the intended use.Online Exclusives Lorenzo Gutierrez, Microfluidics Manager, StarFish Medical 11.16.22
-
R&D & Design | Tubing & Extrusion
Viant Expands Design & Development West Center of Excellence
Supports growing demand for interventional, bioelectronic, and minimally invasive devices.Sam Brusco, Associate Editor 11.15.22
-
R&D & Design
Jabil Opens New Design Center in Poland
The 10,000-square-foot Wroclaw facility will offer a number of highly skilled engineering jobs.Sam Brusco, Associate Editor 11.14.22
-
R&D & Design
New, Innovative Projects Best-Suited for In-House R&D
But outsourcing should be considered if the work becomes repetitive.Online Exclusives Michael Barbella, Managing Editor 10.28.22
-
R&D & Design
Heraeus Medical Components Changes Name to Heraeus Medevio
New name reflects expanding offerings in design, development, and commercialization for partners in the medical device industry.Charles Sternberg, Associate Editor 10.27.22
-
R&D & Design
BlackHägen Design Expands Staff Expertise in Critical User-Centered Design
The expansion is in direct response to new requirements for the development of advanced products and procedures.Charles Sternberg, Associate Editor 10.26.22
