Search Results for 'Molding'
Buyers Guide Companies
Microsite Companies
Featured Companies
View All Buyers Guide Companies »
Buyers Guide Categories
View All Categories »
-
Molding | Surgical
Optimizing MIM in Medical Device Manufacturing
Metal injection molding (MIM) is a good choice for producing medium- to high-volume medtech parts.Steve Santoro, Executive Vice President, MICRO 04.01.21
-
Contract Manufacturing | Molding
Medtech Makers: Molding Validation Optimization
PTI’s Steve VanderKooi offers advice to help manufacturers avoid pitfalls and delays to ensure a timely and repeatable validation protocol.
-
Molding
Diversified Plastics Significantly Increases Vertical-Press Capacity
The capacity is aimed at supporting medical device and other manufacturers.Michael Barbella, Managing Editor 01.28.21
-
Molding
Medtech Makers: Material Science for Micromolding
Patrick Haney of MTD Micro Molding shares his expertise and helps clarify value of understanding the reaction materials experience.
-
Molding
Freudenberg Medical Expands Injection Molding Operations
Adds new machines at its Baldwin Park, California facility.Freudenberg Medical 01.21.21
-
Molding
A 'Trial and Error' Approach to Micromolded Parts
The medical industry's stringent requirements makes innovation difficult for injection-molded components.Online Exclusives Michael Barbella, Managing Editor 12.07.20
-
Molding
Tooling Precision is Key to Micromolding Success
Tool quality dictates part quality for all sizes of medical components.Online Exclusives Michael Barbella, Managing Editor 12.03.20
-
Molding
Medtech Miniaturization is Becoming a 'Way of Life'
Micromolding suppliers should be ready to take on potential roadblocks when designing small parts.Online Exclusives Michael Barbella 11.30.20
-
Molding
Smaller Cavity Features Not Always Sensible for Micromolded Products
Though the need to reduce size is crucial, small cavity characteristics may be challenging to reproduce in volume.Online Exclusives Michael Barbella, Managing Editor 11.24.20
-
Molding
Miniaturization of Medical Devices Creating Big Assembly Challenges
Extremely tight tolerances leave no room for error.Online Exclusives Michael Barbella, Managing Editor 11.20.20
-
Molding
A Primer on the Benefits of Metal Injection Molding
High volume, high performance, complex surgical instrument parts are achievable at an affordable cost with the fabrication process.Online Exclusives Steve Santoro, EVP, MICRO 10.13.20
-
Molding
Little Big Parts: Micromolding Under the Microscope
Minimally invasive surgery, device miniaturization, and age-related conditions are increasingly driving the need for micromolded medtech components.Michael Barbella, Managing Editor 10.01.20
-
Molding
Trelleborg Expands Facility
Invests in new presses and other equipment designated for silicone molding.Trelleborg 09.24.20
-
Molding
MTD Micro Expands Charlton Facility
Doubles cleanroom manufacturing space.MTD Micro Molding 09.14.20
-
Molding
Plastikos Medical Develops 100 Percent Resin Sustainability Program
Firm has developed a method of reusing and/or recycling 100 percent of the waste material that may result from the runner systems.Plastikos Medical 08.25.20
-
Molding
Micro Manufacturing – It's a Small World, After All
Miniaturization continues to be among the most prominent trends in the medical device industry.Scott Herbert, President of Rapidwerks
-
Molding
Technimark Buys European Injection Molder Tool & Plastic Industries
Acquiring injection molded product supplier expands global manufacturing platform and healthcare focus.PR Newswire 07.15.20
-
Molding
New Medical TPEs Provide Excellent Adhesion to Various Engineering Plastics
Medalist MD-30000 Series offers productivity advantages over silicones and includes grades optimized for softness, compression set, and oil resistance.Teknor Apex Company 06.17.20
-
Molding
Molding Medtech’s Future Through Technology and Partnership
Reassessment of supply chains and technology advancements make domestic molders attractive options for medical device manufacturers.Mark Crawford, Contributing Writer 06.04.20
-
Molding
Hoffer Plastics is Now a MedAccred Certified Injection Molder
Certification will enable the company to interface directly with medical device manufacturers.Hoffer Plastics 05.07.20
-
The Medtech Supply Chain and COVID-19
How are service providers and component suppliers adjusting to life during a pandemic to ensure they maintain quality?Online Exclusives Sean Fenske, Editor-in-Chief 04.22.20
-
Molding
Mack Molding, Health System Partner to Develop Face Mask Alternative
Within two weeks, the team fabricated an attachment to a snorkeling scuba mask.Mack Molding 04.22.20
-
Molding
Vaupell Midwest Earns MedAccred Accreditation for Plastic Injection Molding
MedAccred is an oversight program designed to provide manufacturing supply-chain oversight for OEMs looking to partner with Contract Manufacturers.Vaupell Midwest 04.16.20
-
3D/Additive Manufacturing
UCLA Bioengineers Create Reusable COVID-19 Face Shields
Device’s headband can be mass-produced using 3D injection molding; clear plastic shield is made by laser cutting.Brianna Aldrich and Christine Wei-li Lee, UCLA Newsroom 04.08.20
-
ZVerse Working to Produce 20 Million Face Shields
Small digital manufacturing company pivots to support COVID-19 response.Globe Newswire 04.08.20
-
Fictiv Donates Tool to Make Millions of Face Shields Available to Hospitals
New tool and injection molding process can produce millions of face shields a month with lead times as fast as one day.Globe Newswire 04.06.20
-
Mack Molding Names Vice President of Business Development
Company also has added positions and/or promoted workers in quality, business development, customer management, manufacturing, purchasing and human resources.Mack Molding 04.02.20
-
The Challenge and Opportunity in Corporate Environmental Sustainability Efforts
One company shares its experiences and outcomes with ongoing efforts toward a focus on environmental stewardship.Neil Peterson, Alisha Jerauld, CPA and Matt Wold, Merit Medical Systems Inc. 04.01.20
-
Molding
GW Silicones Announces Fourth Expansion Since Inception
Contract manufacturer grows advanced silicone tooling and molding operation in Royalton, Vt.GW Plastics 03.12.20
-
Materials
A Matter of Substance: Medical Device Materials
Medtech manufacturers are leveraging cleaner, more lightweight materials to meet increasing demand for home healthcare solutions and wearable devices.Michael Barbella, Managing Editor 03.04.20
-
Contract Manufacturing
The Seychelles—A Solution for Niche Production
Geographic location, free trade agreements, and an educated workforce make the location an excellent fit for the right manufacturer.Jude Shroff, Managing Director, Chelle Medical Ltd. 03.04.20
-
Dawn of a New Decade: Looking Ahead to Medtech’s Future
The start of the '20s offers the industry an opportunity to build value through new tech., collaborations, clinical validations, and value-based outcomes.Mark Bonifacio, President, BCS LLC 03.04.20
-
Tegra Medical Promotes from Within for Executive Team
Walter Gacek named new vice president of sales and marketing.Tegra Medical 03.03.20
-
-
Plastics Hall of Fame Honors Late MTD Micro Molding President
Dennis Tully is one of the six posthumous inductees this year.MTD Micro Molding 02.21.20
-
Machining & Laser Processing
Upgrading Machining and Laser Processing for Medtech Manufacturing
A conversation with several experts from Weiss-Aug about the trends and challenges impacting medtech machining and laser processing.Online Exclusives Sam Brusco, Associate Editor 02.21.20
-
Molding
The Need for Collaboration and DFM When Micro Molding
Why a collaborative and transparent relationship between micro molder and client is important.Online Exclusives Roger Hargens, CEO/President, Accumold 02.12.20
-
Freudenberg Medical Showcasing Products and Processing Technologies at MD&M West
Multi-lumen silicone tubing, tri-layer tubing, and a conductive silicone compound are among the innovations on display this week.Freudenberg Medical 02.12.20
-
DuPont Launches New Delrin Resin
Features low COF for smooth, easy device actuation.DuPont 02.11.20
-
Molding
Comar to Expand West Coast Footprint
The new 230,000-square-foot facility will feature a full-service mold prototyping lab, and dedicated mold sampling and development equipment.Comar 02.10.20
-
Jabil Rebrands its Healthcare Business
Jabil Healthcare serves five key sectors: medical devices, orthopedics, diagnostics, pharmaceutical delivery systems, and consumer health.Jabil Inc. 02.03.20
-
Comar Acquires iMARK: An Exclusive Delve Into the Deal
Comar's CEO shares with MPO the benefits of the alliance.Online Exclusives Sean Fenske, Editor in Chief 01.27.20
-
Contract Manufacturing | Molding
GW Plastics Completes Manufacturing and Tech Center Expansion
Second expansion in three years for advanced manufacturing facility.GW Plastics 01.20.20
-
Molding
Plastikos Inc. Invests in Equipment to Advance Micro Molding Capabilities
Each machine is capable of delivering a shot size as small as 0.3 ounces of material.Plastikos 01.13.20
-
Phillips-Medisize Expands Struer, Denmark Facility
Expands clinical manufacturing capabilities to serve the growing drug delivery device market.Phillips-Medisize, a Molex company 01.09.20
-
Phillips-Medisize Opens New Global Innovation and Development Office in Denmark
The firm is now in the middle of the Medicon Valley cluster, close to top universities, hospitals and global R&D-based device companies.Business Wire 01.06.20
-
Materials | Molding
Tessy Plastics Expands
The expansion is planned to be part of the “South Plant” located in Elbridge, New York.Tessy Plastics 01.06.20
-
Tubing & Extrusion
-
Materials
Understanding Key Processes for Mixing APIs with Silicone
The pros and cons of drug delivery and device enhancement.Online Exclusives Andrew Gaillard, Healthcare & Medical Segment Manager, Trelleborg Sealing Solutions 12.05.19
-
R&D & Design
How to Minimize Color Variations in Your Medical Device
The key to making a medical device look great is to minimize obvious defects that catch the eye.Online Exclusives Dana Trousil, Medical NPI Team Lead, StarFish Medical 12.03.19
