Outsourcing Directory
Carclo Technical Plastics
Company Headquarters
600 Depot Street
Latrobe, PA 15650
United States
Company Description
Carclo Technical Plastics specializes in injection molding and contract manufacturing services for medical and optics applications. Manufacturing includes controlled cleanroom environments, automation, and assembly services. The company operates out of the United States, United Kingdom, Czech Republic, India, and China to ISO 9001, ISO 14001, and ISO 13485, ISO 45001, and ISO 16949 certifications as well as FDA registration. The synergy of Carclo provides an extensive list of technical capabilities and global facilities to meet the increasing logistical and cost requirements of tomorrow.
Outsourcing Directory
- Assembly Services
- Automation
- Cleanroom
- Coating/Laminating/Metalizing
- Design/Engineering
- FDA Compliance
- Filters
- Full-Service Manufacturing
- GMP Compliance
- Lean Manufacturing/Six Sigma
- Mold Building
- Molding, Enclosures
- Molding, Implantables
- Molding, Micro
- Molding, PEEK
- Molding, Plastics
- Molding, Thermoplastic Elastomers
- Needles & Syringes
- Printing
- Process Validation/Quality Control
- Project Management
- Prototyping
- Quality Assurance
- Quality Management
- Rapid Prototyping
- Tooling
- Warehousing and Distribution
- Welding
- Welding, Laser
- Welding, Ultrasonic
In-Vitro Diagnostic Categories
Medical Device Categories
Related Content
-
Diagnostics | Neurological
RSNA News: MaxQ AI to Offer Accipio Applications on Blackford Platform
Represents cost savings and increased quality of care.MaxQ AI 12.04.19
-
The Special 510(k) Program—Mike on Medtech
Mike Drues and Sean Fenske discuss a 510(k) option for modifications to a company's legally marketed medical device.Sean Fenske, Editor-in-Chief 11.13.19
-
Cardiovascular | Neurological
Anaconda Biomed Completes First-in-Human Study of Thrombectomy System
Trial Data will support regulatory submission to FDA.Business Wire 11.05.19
-
Flambeau Hires VP of North American Operations
New executive previously worked as vice president of Global Manufacturing for Terumo BCT.Flambeau Inc. 11.05.19
-
Fiasp Approved for Use with the Omnipod System in the U.S.
An ultra-fast-acting insulin developed by Novo Nordisk.Insulet Corporation 10.29.19
-
Packaging & Sterilization
Top Surgeons Write Letter to the FDA
Stress the importance of Ethylene Oxide for medical device sterilization.AdvaMed 10.25.19
-
Cardiovascular | Diagnostics | Digital Health | Neurological | Patient Monitoring | Software & IT
Bayer Inks Deals with 11 Digital Health Startups
Eleven healthcare startup companies to be supported by Bayer’s “G4ADigital Health Partnerships program.”Bayer 10.14.19
-
Cardiovascular
Corvia Medical's Shunt Device Receives Breakthrough Device Designation
May reduce symptoms and slow the progression of heart failure.PRNewswire 10.09.19
-
Cardiovascular
Medtronic Stent Graft System Receives FDA Breakthrough Device Designation
Developed to treat thoracoabdominal aortic aneurysm.Globe Newswire 10.08.19
-
Electronics | Machining & Laser Processing | Materials | Molding
Changing of the Guard? The Rise of Asia’s Medtech Suppliers
This article explores the implications for three emerging supplier regions in Asia: Malaysia, Singapore, and Vietnam.Mihir Torsekar, International Trade Analyst, U.S. International Trade Commission 10.08.19
-
Neurological
Highmark Interactive Receives FDA Clearance for Gamified Neurological Testing Platform
‘EQ Brain Performance’ is a tool that addresses cognitive, visual and balance performance.Highmark Interactive 10.08.19
-
Surgical
Top 10 Health Technology Hazards for 2020
The new report identifies safety issues and action steps for 10 dangerous and preventable hazards.ECRI Institute 10.07.19
-
Neurological
Medtronic Submits InterStim Micro Neurostimulator and SureScan MRI Leads to FDA
Pending approval, the devices could be available Spring 2020.Medtronic plc 10.07.19
-
Surgical
Apollo Endosurgery Receives 510(k) Clearance for Suture-Anchor Component
Reduces dependency on third party suppliers.Apollo Endosurgery 09.18.19
-
Harvard Bioscience Names CFO
New hire has more than 19 years of finance and operational expertise.Globe Newswire 09.12.19
-
University of Chicago Researchers Conduct Study of Unique Device to Lower High Blood Pressure
CALM-2 clinical trial, sponsored by VDI, focuses on drug-resistant hypertension.Business Wire 07.31.19
-
Surgical
Obalon Makes Moves on First Company-Owned Retail Weight Loss Center
The first Obalon retail center will be located in San Diego and the company is targeting this fall for its grand opening.GlobeNewswire 07.24.19
-
Molding
Carclo Technical Plastics Announces Facility Expansions
Move increases supplier’s capabilities in targeted regions.Carclo Technical Plastics Ltd. 03.28.18
-
Contract Manufacturing | Molding
Carclo Expands in Northeast
Company acquires Precision Tool and Die.Carclo Technical Plastics 11.07.16
-
Contract Manufacturing | Molding
Carclo Technical Plastics Expands Drug Delivery Device, Diagnostic Disposable Manufacturing
CTP is investing significantly in new manufacturing space, injection molding machines, ancillaries, and specialist staff.Carclo Technical Plastics (CTP) 10.10.16
