06.12.06
Molding Services and Equipment
The following directory lists suppliers who provide molding services and equipment to the medical device industry.
Advanced Molding Technologies
3472 88th Avenue, NE
Circle Pines, MN 55014
Phone: (763) 785-9229
Fax: (763) 785-9669
E-mail: gfischer@advancedmt.com
Contact: Greg Fischer
Products and Equipment: Medical Molding and Assembly.
Services: AMT provides tooling solutions with fast lead times! Specialists in product design, rapid tooling, molding/assembly, mold building (domestic/off-shore), dimensional development, turnkey systems and secondary services. Leverage our experience in overmolding, thin wall, insert molding and multi-tool packages. Class 10,000 cleanroom molding/assembly, compliments AMT’s commitment to the medical industry.
Advanced Scientifics
163 Research Lane
Millersburg, PA 17061
Phone: (800) 724-4158
Fax: (717) 692-2197
Web: www.advancedscientifics.com
E-mail: sales@advancedscientifics.com
Contact: Derek Masser
Comments: Advanced Scientifics is a complete contract manufacturer of disposable medical devices, IV/media bags, and fluid administration/extensions designed to meet your needs. Capabilities include design/prototyping, clean room injection molding, assembly, packaging services and sterilization/validation management. FDA Registered, ISO 13485: 2003.
Asia Medsource
4 Pinecrest Terrace
Portsmouth, NH 03801
Phone: (603) 427-1400
Fax: (603) 427-0457
Web: www.asiamedsource.com
E-mail: info@asiamedsource.com
Contact: Jeremy Shepard
Services: Offshore manufacturing management and sourcing, medical component manufacturing.
Comments: Asia Medsource locates qualified and reputable manufacturing sources in China for US medical OEMs. We assist our customers from the design phase through full production, allowing safe and cost-effective manufacturing in Asia.
ATP Engineered Rubber & Plastics Group
565 E. Swedesford Road, Suite 315
Wayne, PA 19087
Phone: (610) 688-2200, ext. 1225
Fax: (610) 688-1534
Web: www.atperpg.com
Contact Person: Ji Mu
Comments: ATP ERPG offers exceptional capabilities in the design and manufacture of molded components for the medical devices, surgical instruments and pharmaceutical markets. We are experienced in two-shot auto-rotate molding, and over-molding of rubber to plastic, titanium and other substrates. We are GMP compliant and provide dedicated clean room molding capabilities.
Avail
1600 Wells Fargo Tower
201 Main Street
Fort Worth, TX 76102
Phone: (817) 877-4343
Fax: (817) 877-4909
Web: www.availmed.com
E-mail: contact@availmed.com
Contact: Jennifer Spiro
Services: Avail is the largest outsourcing designer and manufacturer of finished, disposable medical devices, offering turnkey product management from design to sterile goods. Avail’s facilities include class 10,000 and 100,000 cleanrooms for complex device assembly, as well as controlled manufacturing environments. More than 3,500 people are employed at 18 locations throughout the United States, Mexico, Europe and China. Avail’s injection molding facilities house state-of-the-art equipment to produce high-quality, precision components. Tonnage capacity ranges from 22 to 660 tons. Specific capabilities in these facilities include: mold design and mold building; insert and over molding; medical assemblies; sterile packaging; sonic welding; distribution; screen printing; hot stamping; and pad printing.
B. Braun OEM Division, B. Braun Medical Inc.
824 Twelfth Avenue
Bethlehem, PA 18018
Phone: (866) 8-BBRAUN toll free; or (610) 691-6785
Fax: (610) 691-1785
Web: www.bbraunoem.com
E-mail: info-usa@bbraun.com
Services: The B. Braun OEM Division, B. Braun Medical Inc., delivers complete contract manufacturing capabilities, focusing on Class II and Class III medical devices for the pharmaceutical, biotech, and surgical markets. The company’s primary 375,000-square-foot facility houses equipment that stands at the forefront of technology. Available are over 70 injection-molding and nine insertion-molding machines, nine extruders with custom-controlled laser micrometering, custom molding and extrusion, and ultrasonic welding systems. The division also offers services throughout the medical product life cycle, including design and prototyping, manufacturing, packaging, private labeling, sterilization, and quality control.
Boy Machines, Inc.
199 Philips Road
Exton, PA 19341
Phone: (610) 363-9121
Fax: (610) 363-0163
Web: www.boymachines.com
E-mail: sales@boymachines.com
Contact: Robert Koch
Products and Equipment: Horizontal and vertical injection molding machines up to 100 US tons.
Comments: Capabilities include thermoplastic, thermoset, elastomer, LSR, PIM, cleanroom, insert and micromolding.
C. Brewer Co.
3630 Miraloma Avenue
Anaheim, CA 92806
Phone: (714) 630-6810
Fax: (714) 630-5527
Web: www.cbrewer.com
E-mail: jbrindle@cbrewer.com
Contact: Jeanne Brindle
Products and Equipment: Full service mold making, custom injection molding and sub-assembly.
Comments: C. Brewer Co. is a full service injection molder specializing in the “scientific approach” to molding. Offerings include 50 molding machines ranging from 40T to 500T in two locations and a class 100,000 cleanroom.
Da/Pro Rubber
P.O. Box 470175
Tulsa, OK 74147; or
601 N. Poplar Avenue
Broken Arrow, OK 74012
Phone: (918) 258-9386
Web: www.daprorubber.com
E-mail: sales@daprorubber.com
Contact: Holly Dorland
Services: Custom molded rubber components, custom molded plastic/TPR components.
Comments: Da/Pro Rubber is a leading manufacturer of precision molded rubber, plastic and TPE products. Da/Pro offers complete in-house capabilites including design assistance, compound development, laboratory testing and sub-assembly. Da/Pro has the capability, knowledge and experience to be your molding partner.
DeRoyal OEM
200 DeBook Lane
Powell, TN 37849
Phone: (865) 362-2222
Fax: (865) 362-1348
Web: www.deroyal.com
E-mail: oeminfo@deroyal.com
Contact: Keenan Holbert
Products and Equipment: Control syringes, stopcocks, manifolds, tubing, suction canisters, needle counters, scalpel holders, towel clamps, bowls, basins and trays.
Services: Injection molded medical products.
Comments: DeRoyal is a vertically integrated OEM services provider to the medical industry, specializing in custom injection molded plastics and custom adhesive-backed, die-cut components.
Dielectrics, Inc.
300 Burnett Road
Chicopee, MA 01020
Phone: (413) 594-8111
Fax: (413) 594-2343
Web: www.dielectrics.com
E-mail: sales@dielectrics.com
Contact: Bart Rietkerk
Services: Dielectrics, Inc. is a specialist in the design, development and fabrication of specialty OEM medical products and components using flexible thermoplastic films and film/fabric laminates. Subspecialties include thin film welding; latex-alternative balloon; and air, gel and fluid bladder technology.
Donatelle
501 County Road E-2 Extension
New Brighton, MN 55112
Phone: (651) 633-4200
Fax: (651) 633-5486
Web: www.donatelleplastics.com
E-mail: sales@donatelleplastics.com
Contact: Cindy Dupay
Products and Equipment: Medical devices.
Services: Custom plastic injection molding, liquid silicone injection molding, insert molding, overmolding and white room molding.
Comments: Donatelle also offers design and engineering services, tooling design and fabrication. Class 100,000 cleanroom assembly and contract manufacturing.
Ethox International
251 Seneca Street
Buffalo, NY 14204
Phone: (716) 842-4000
Fax: (716) 842-4040
Web: www.ethoxcorp.com
E-mail: info@ethoxcorp.com
Contact: Richard Malo
Comments: Ethox International is a vertically integrated disposable device manufacturer and sterilizer. Contract services include engineering, research and development, validations, project and supplier management, prototyping, injection molding and plastics conversion. Services also include marking, custom assembly, packaging, package testing, accelerated aging, sterilization validations, BIER testing, HPLC analysis for drug and drug combination products, extractable metals analysis, warehousing and fulfillment. Ethox is FDA registered, cGMP compliant and ISO 13485 certified.
Farlow’s Scientific Glassblowing, Inc.
200 Litton Drive, Suite 234
Grass Valley, CA 95945
Phone: (530) 477-5513
Fax: (530) 477-9241
Web: www.farlowsci.com
E-mail: sales@farlowsci.com
Contact: Josh Robertson
Products and Equipment/Services: Farlow’s Scientific GlassBlowing manufactures glass molds, straight tubes, and tipping dies for catheter production. The company makes glass anatomical models for testing, flow, and demonstration. A balloon blowing machine is also manufactured to form balloons using the glass molds. We offer rapid repair for apparatus with shipping available worldwide. Farlow’s offers glass to metal seals, specialty syringes, laser assemblies, fiber optic couplers and quartz glass products.
Filtertek, Inc.
11411 Price Road
Hebron, IL 60034
Phone: (815) 648-2416
Fax: (815) 648-2929
Web: www.filtertek.com
Products and Equipment: Filtertek designs and manufactures custom filters, valves and other injection molded components for OEMs. The company has the experience to develop products using the following technologies; injection molded plastics, metal stamping and forming, molded hole technology, pleated products, technical molding, exo-molding, product assembly and packaging.
Services: Filtertek provides full-service design engineering, tooling, prototyping, testing, automated manufacturing, value-added assembly and packaging to customers worldwide.
Comments: Filtertek produces its products at manufacturing facilities certified to the highest quality standards.
Gauthier Biomedical, Inc.
1235 North Dakota Drive
Grafton, WI 53024
Phone: (866) 546-0010
Fax: (262) 546-0011
Web: www.gauthierbiomedical.com
Contact: Michael Gauthier, president
Products and Equipment: Ratcheting screwdriver handles, torque limiting/torque measuring instruments, spinal instruments, silicone handles, Quick Connects, custom orthopedic instruments.
Services: Gauthier Biomedical's silicone handles are manufactured using a state-of-the-art proprietary process, with the ability to overmold onto stainless steel, aluminum and high performance plastic cores. The material used for the silicone handles is a custom blended formulation, allowing for specific hardness and color requirements.
Gore
555 Papermill Road
Newark, DE 19711
Phone: (877) GOREOEM toll free; or (928) 864-2904
Fax: (480) 756-4404
Web: www.gore.com
Products and Equipment: Medical electronic cable and components, medical membranes for venting and filtration, medical protective fabrics, implant biomaterial, catheters, extrusion and custom medical devices, wall-reinforced and high pressure medical tubing.
GW Plastics, Inc.
239 Pleasant Street
Bethel, VT 05032
Phone: (802) 234-9941
Fax: (802) 234-9936
Web: www.gwplastics.com
E-mail: Tim.Reis@GWPlastics.com
Contact: Tim Reis
Products and Equipment: Custom Injection Molder, Mold Design & Mold Builder. 150 Injection Machines. 7 ton to 650 ton including rotary insert and multi-shot. CAD/CAM including Laser, EDM, Wire EDM, 5 axis CNC Machining Center.
Comments: GW Plastics, Inc. is a global injection, multi-shot and insert molder servicing the healthcare market with precision components & assemblies for surgical & disposable diagnostic devices in class 100,000 clean room molding and assembly. Plants are located in Bethel, VT, Royalton, VT, San Antonio TX, Tucson AZ, Queretaro, Mexico, and Guangdong, China. ISO, QS, FDA registered.
Helix Medical
1110 Mark Avenue
Carpinteria, CA 93013
Phone: (805) 684-3304
Fax: (805) 684-1934
Web: www.helixmedical.com
Contact: Lindsay Spence
Products and Equipment: Production, assemblies and packaging.
Services: LIM (liquid injection molding), compression molding, transfer molding, insert molding, micro molding, plastic injection.
Comments: Helix Medical develops, manufactures and supplies custom fabricated silicone components/products for the medical device industry. Products are manufactured in FDA registered medical device facilities certified under ISO 13485 quality standards and meet USP Class VI biocompatiblity requirements.
The Hi-Tech Group
3191 E. La Palma Avenue
Anaheim, CA 92806
Phone: (800) 924-4832 toll free; or (714) 632-7710
Fax: (714) 632-5647
Web: www.hi-tech-group.com
E-mail: shubroto@hitech1.com
Contact: Shubroto Chattopadhyay
Services: The Hi-Tech Group companies provide biomedical OEMs a valued resource for product development to problem-solving, complex tool design, multiple processes, materials’ engineering and medium to high volume production of molded silicone, rubber, thermoplastic components and their sub-assemblies. Class 100,00 clean room molding, assembly and inspection; ISO 9001:2000 and ISO 13485 certified.
Hoover Precision Products, LLC
1390 Industrial Park Drive
Sault Ste. Marie, MI 49783
Phone: (906) 632-7310
Fax: (906) 632-7555
Web: www.hooverprecision.com
E-mail: sales@hooverprecision.com
Contact: Nancy Whitworth
Products and Equipment: Precision ball products and component injection molding in a class 100,000 cleanroom, engineering and packaging support.
Comments: Look to the industry leader of solid phase plastic beads and precision spheres for your total solution: One source for injection molded components, assembly and packaging.
Instrumentation Industries, Inc.
2990 Industrial Blvd.
Bethel Park, PA 15102
Phone: (412) 854-1133
Fax: (412) 854-5668
Web: www.iiiMedicalOEM.com
E-mail: Larrys@iiioem.com
Contact: Larry Slattery
Products and Equipment: iiiMedical OEM is a manufacturer of low cost high quality injection molded thermo-plastic and silicone rubber components.
Comments: Capabilities include precision machining, tool and die building, rapid prototyping, engineering and design services. ISO 13485:2003 certified; FDA registered.
Interface Associates Inc.
27752 El Lazo Road
Laguna Niguel, CA 92677
Phone: (949) 448-7056
Fax: (949) 448-7016
Web: www.interfaceusa.com
E-mail: info@interfaceusa.com
Products: Interface Associates has developed a complete line of specialized machines and fixtures that simplify and improve the many steps associated with catheter production and balloon forming. Our equipment includes catheter balloon forming machines, tubing stretching machines, leak testers, marker band swagers, welding and hot air systems, balloon folding and wrapping fixtures.
Services: Interface Associates offers outsourcing services for the development and production of balloons and balloon catheters. A variety of shapes, sizes, materials and configurations are available to meet your specifications.
Jamak Fabrication Inc.
1401 N. Bowie Drive
Weatherford, TX 76086
Phone: (800) 395-2625, ext. 5250 (toll free)
Fax: (817) 594-8324
Web: www.jamak.com
E-mail: healthcare@jamak.com
Contact: Pamela Parkinson
Products and Equipment: Silicone tubing, custom profile extruded silicone, high consistency rubber molding and liquid injection molding. Manufactured in class 100,000 cleanroom.
Services: Silicone fabrication of custom components; design assistance available.
Kahle USA
25 DeForest Avenue
Summit, NJ 07901
Phone: (908) 598-1140
Fax: (908) 598-1160
Web: www.kahleautomation.com
E-mail: kahle@kahleautomation.com
Contact: Julie Logothetis
Products and Equipment: Kahle provides complete system integration and material handling for all components from molding to final assembly and packaging. They have a full line of standard and custom-built automatic loading and transfer systems to integrate a myriad of assembly and process equipment to packaging machines and beyond.
Services: Kahle provides everything from equipment to design, fabrication and validation with documentation through installation and service at the customer’s facility.
Comments: Kahle provides custom-made automation equipment for IV products, safety devices, catheters, blood collection products, syringes, needles, tubing and related medical devices, pre-filled syringes and other pharmaceutical devices.
Kamco Plastics, Inc.
851 East State Parkway
Schaumburg, IL 60173
Phone: (847) 882-3550
Fax: (847) 882-6512
Web: www.kamcoplastics.com
E-mail: jshedd@kamcoplastics.com
Contact: Jack Shedd
Products and Equipment: Kamco Plastics has been providing custom solutions to plastics part manufacturing, decoration and assembly challenges for over 30 years. In-house engineering and design expertise are supported by globally sourced mold building. Manufacturing capabilities include advanced automation, robotics and process control. Injection molding technical capabilities include gas assist, over-molding, precision, cavity pressure control and in-mold decoration. Secondary operations include multi-stage sonic welding, automated assembly, product reliability testing and plastics machining. Kamco is ISO 9001:2000 certified and FDA registered. Industries served include appliance, medical, automotive and consumer electronics. Press sizes from 55 to 2500 ton. Locations in Schaumburg, IL; Florence, SC and a new facility in Reynosa, Mexico. Kamco Plastics, Inc. is FDA certified.
Kent Elastomer Products, Inc.
1500 St. Clair Avenue
Kent, OH 44240-0668
Phone: (800) 331-4762 toll free; or (330) 673-1011
Fax: (330) 673-1351
Web: www.kentelastomer.com
E-mail: info@kentelastomer.com
Contact: Cindy Harry
Products and Equipment: Dip molded products, rubber molding, extrusion.
Mack Molding Company
608 Warm Brook Road
Arlington, VT 05250
Phone: (802) 375-2511
Fax: (802) 375-9419
Web: www.mack.com
E-mail: salesnorth@mack.com
Contact: Julie Horst
Services: Mack Molding specializes in medium- to large-part molding, metal fabrication and assembly up to and including FDA approved device manufacturing services in ISO 9001, ISO 13485 compliant, and Class 100,000 clean room environments. Product development resources include device design, prototyping and on-site full-time engineering support. With 86 years of plastics expertise, Mack is a multifacility, customer-focused organization.
Medefab
81 Turnpike Road
Jaffrey, NH 03452
Phone: (603) 532-5656
Fax: (603) 532-5921
Web: www.medefab.com
E-mail: info@medefab.com
Products and Equipment: Medefab is a single-source, full-service, FDA registered, ISO certified medical product contract manufacturer. Complete in-house capabilities include tubing extrusion, insert and loose-piece molding, assembly, printing and decorating, hot stamp marking and other finishing operations.
Medisize Development & Manufacturing
Edisonstraat 1
2181 AB Hillegom
The Netherlands
Phone: +31 (0) 252 576 888
Fax: +31 (0) 252 519 825
Web: www.medisize.com/dm
E-mail: sales.dm@medisize.com
Services: Medisize is a full service contract manufacturer specializing in custom-made, single use sterile devices and primary pharmaceutical packaging. Capabilities include development, project management, industrialization, injection molding, two-shot molding, insert molding, silicon molding, blow molding, stretch blow molding, assembly, welding, packaging, sterilization and validation. State-of-the-art cleanroom facilities are located in The Netherlands, Ireland, Switzerland and the Czech Republic.
Comments: FDA registered/ISO 13485 certified.
The MedTech Group, Inc.
6 Century Road
So. Plainfield, NJ 07080
Phone: (908) 561-0717
Fax: (908) 561-3811
Web: www.medtech-group.com
Contact: Esther Nam
Services: The MedTech Group, Inc. is a medical device manufacturing company that provides high quality plastic injection-molded components and medical devices. Areas of expertise include product design and validation, surgical staple manufacturing, cleanroom molding including two-shot and insert molding, complete device assembly and packaging, sterility validation and management. MedTech has its headquarters in South Plainfield, NJ with additional facilities in MIddlesex, NJ; West Haven, CT; Milford, CT; Vega Baja, PR and Heredia, CR. The company is FDA registered and we are ISO 13485:2003 certified.
Midwest Plastic Components
7309 West 27th Street
Minneapolis, MN 55426
Phone: (952) 929-3312
Fax: (952) 929-1557
Web: www.mpc-medical.com
E-mail: mschaefer@mpc-mn.com
Contact: Mark Schaefer
Products and Equipment: FDA registered contract manufacturer focusing on injection molded implantable and non-implantable medical devices.
Services: Tool design and development, injection molding, assembly, packaging and sterilization management and all related validations.
Comments: Prototyping through high volume production capability. Class 100,000 cleanroom molding of bioresorbable implants and other components/devices from all major thermoplastic materials. ISO 9001:2000 and ISO 13485 along with FDA registration # 2183967.
Minnesota Rubber & QMR Plastics
1100 Xenium Lane N.
Minneapolis, MN 55441
Phone: (952) 927-1400
Fax: (952) 927-1470
Web: www.mnrubber.com
E-mail: webmaster@mnrubber.com
Services: Custom molder of rubber and plastic components.
Comments: Custom molder of precision rubber and plastic components. Offering medical grade molding, inlcuding silicone over modling. Complete design, prototyping, tool making, R&D compounding, class 10,000 and 100,000 clean rooms with worldwide manufacturing. ISO/TS 16949 certified.
Modified Polymer Components, Inc.
242 Humboldt Court
Sunnyvale, CA 94089
Phone: (408) 733-8900
Fax: (408) 733-8905
Web: www.modifiedpolymer.com
E-mail: modified@modifiedpolymer.com
Contact: Noel Taylor
Products and Equipment: Modified Polymer Components, Inc. designs, develops and manufactures components and assemblies for the medical device and diagnostics industries. We buy commercially available tubing, custom tubing or components and modify them to meet our customer’s requirements. We do contract assembly for subassemblies and complicated components. We do reinforced shafts and complex catheter constructions. We are ISO 13485 and 9001 certified. We routinely manage our customers’ supply chain for them. We can handle complicated assembly of all sizes.
Moll Medical, a Division of Moll Industries, Inc.
13455 Noel Road, Suite 1310
Dallas, TX 75240
Phone: (972) 663-6900
Fax: (972) 663-6950
Web: www.mollmedical.com
E-mail: info@mollindustries.com
Contact: Dana Gecker
Products and Equipment: Moll Medical is an expert injection molder/contract manufacturer of Class I, II and III medical devices and components, operating class 10,000 and 100,000 cleanrooms globally, and supplying value-added secondary processes, supply chain management and custom solutions.
Comments: Medical molding, custom manufacturing; devices, components and final assemblies; logistics, full services and supply chain solutions.
MRPC
13161 W. Glendale Avenue
Butler, WI 53007
Phone: (888) 781-7122 toll free; or (262) 781-7122
Fax: (262) 781-5353
Web: www.mrpcorp.com
E-mail: sales@mrpcorp.com
Contact: TS Pakenham
Services: Custom molder of silicone and synthetic polyisoprene components for the medical device market. MRPC molds plastic engineered materials both rigid and flexible for medical. Two material molding and insert molding. Total cleanroom manufacturing, ISO 9001:2000 certified.
NDH Medical, Inc.
11001 Roosevelt Blvd. N., Suite 150
St. Petersburg, FL 33716
Phone: (727) 570-2293
Fax: (727) 570-3793
Web: www.ndhmedical.com
E-mail: info@ndhmedical.com
Contact: G. A. Havran
Services: Custom insert molding of catheter components and assemblies.
Comments: NDH Medical provides custom insert molding services for catheter assembly and components. Custom extrusions for catheters and other medical devices, as well as turnkey manufacturing outsourcing, are available.
Nypro Medical Products Group
101 Union Street
Clinton, MA 01510
Phone: (978) 368-6854
Fax: (978) 368-6062
Web: www.nypro.com
E-mail: infompg@nypro.com
Contact: Thomas Taylor
Services: Nypro Medical Products Group designs, develops and manufactures proprietary medical products utilizing complementary processes and progressive technologies. The company focuses on providing innovative solutions to OEM healthcare companies by offering an integrated line of products and services built through strategic joint ventures and partnerships.
Comments: As a wholly-owned subsidiary of Nypro, Inc., customers benefit from Nypro’s global resources including state-of-the-art product and mold design, injection molding services, assembly and contract manufacturing.
Phillips Plastics Corporation
1201 Hanley Road
Hudson, WI 54016
Phone: (888) 633-6653 toll free
Fax: (715) 386-4326
Web: www.phillipsplastics.com
E-mail: info@phillipsplastics.com
Contact: Kelly Stichter
Services: Custom injection molder of plastic and metal, providing total services from design through manufacturing, assembly and packaging.
Plastics One Inc.
6591 Merriman Road
Roanoke, VA 24018
Phone: (540) 772-7950
Fax: (540) 989-7519
Web: www.plastics1.com
E-mail: lbrantingham.payne@plastics1.com
Contact: Lydia Brantingham Payne
Products and Equipment: Plastics One is a multi-faceted medical component manufacturer thatprovides design, molding and assembly of custom cable and connector assemblies with unique industry and design requirements. We also mold nearly all types of commodity and engineering grade resins and out mold designs offer the greatest possible flexibility in your part design.
Services: We offer services to our customers such as design assistance, R&D, and prototyping, along with our very own tooling and molding facility all encompassed in the same building right here in the US.
Comments: Plastics One is an employee owned company with over 57 years’ experience that has grown to be a progressive high-tech medical component manufacturer. We place emphasis on high quality, tight tolerance sloutions and would appreciate the opportunity to produce a quote for your needs.
Polymer Technology Corporation
5120 Parkway Drive
Menomonie, WI 54751
Phone: (715) 235-1464
Fax: (715) 235-1834
Web: www.polymertechnology.com
E-mail: stevej@polymertechnology.com
Contact: Steven Johnson
Services: Polymer Technology operation specializes in medically focused new product development providing accelerated tooling and injection molding services. We offer cleanroom molding services for clients looking to single source prototyping, mold builds, molding and assembly.
Comments: Polymer Technology specializes in insert and overmolded applications. Proprietary technology has been recently developed to overmold or encapsulate electronic circuitry providing gripable surfaces and environmental protection.
ProMed Molded Products, Inc.
15600 Medina Road
Minneapolis, MN 55447
Phone: (763) 559-3500
Fax: (763) 559-1894
Web: www.promedmolding.com
E-mail: claumeyer@promedmolding.com
Contact: Connie Laumeyer
Services: Provider of silicone molded components to the medical industry, prototype through production volumes. Facilities in Minneapolis, MN and Dorado, Puerto Rico.
Providence Enterprise LLC
1500 Quail Street, Suite 420
Newport Beach, CA, 92660
Phone: (949) 851-8888
Fax: (949) 851-8801
Web: www.providence-connect.com
E-mail: bfreeman@providence-connect.com
Contact: Brett Freeman
Comments: Located in Shenzhen, China, Providence Enterprise is a full service Contract Manufacturer specializing in injection molded engineered plastics. Our world-class facilities operate in strict compliance with ISO 13488/13485, UL-746, TS 16949, FDA and NSF standards/certifications. In addition to prototype and production mold making for export or for in-house production, we also excel in production and assembly of medical devices, automotive components, pumps (fluid control), motors, fittings, plastic parts, and sensors.
PTG Global
1220 E. Glenwood Place
Santa Ana, CA 92707
Phone: (714) 432-1160
Fax: (714) 432-8889
Web: www.ptg-global.us
E-mail: rodfujii@ptg.cc
Contact: Rod Fujii
Products and Equipment: Medical devices, point-of-care/patient self-testing diagnostics, industrial and command products.
Services: Industrial design; design engineering; transition to manufacturing; tool construction; rapid prototyping; manufacturing and assembly.
Comments: Pregnancy test kits; immunodiagnositc assays, industrial agents, surgical supplies, lighting and law enforcement devices.
PTI Engineered Plastics, Inc.
44850 Centre Court East
Clinton Township, MI 48038
Phone: (586) 263-5100
Fax: (586) 263-6680
Web: www.teampti.com
E-mail: pti@teampti.com
Contact: Jerry Heckendorn
Services: PTI Engineered Plastics, Inc. is a full-service plastic injection molder specializing in unparalleled project turnaround times. Providing “Rapid Market Entry,” everything from CAD models to injection-molded parts are available in as little as five days without compromise to the customer’s design. Services include prototype, short run, low-volume and high volume products. PTI provides product development, engineering solutions and design assistance using several industry leading, manufacturing processes.
Rapidwerks, Inc.
1257 Quarry Lane, Suite 140
Pleasanton, CA 94566
Phone: (925) 417-0124
Fax: (925) 417-0128
Web: www.rapidwerks.com
E-mail: sherbert@rapidwerks.com
Contact: Scott Herbert
Services: Precision micro molding services, providing expertise in specialized tooling, micro molding and micro insert technology.
Comments: Precision can provide prototype, design, fabricate tooling, mold parts and create complex micromolded components and assemblies for medical devices. See us at www.micromolding.com.
Sil-Pro
740 Seventh Street South
Delano, MN 55328
Phone: (763) 972-9206
Fax: (763) 972-2096
Web: www.sil-pro.com
E-mail: bhiggins@sil-pro.com
Contact: Brian Higgins
Products and Equipment: Transfer and LIM molding machines, extruder and automation equipment.
Services: Class 10,000 silicone molding and extrusion services, secondary operations and sub-assembly.
Comments: Sil-Pro specializes in complex silicone molding and extrusion from prototype and in-house tooling and design build to high volume production and full automated robotic cells. ISO 9001:2000 certified.
Specialty Silicone Fabricators, Inc.
3077 Rollie Gates Drive
Paso Robles, CA 93446
Phone: (800) 349-4284 toll free; or (805) 239-4284
Fax: (805) 239-0523
Web: www.ssfab.com
E-mail: pmazelin@ssfab.com
Contact: Paul Mazelin
Products and Equipment: Calendaring, extrusion, dip coating and molding.
Services: Superior processing systems in silicone fabrication.
Comments: Specialty Silicone Fabricators, experts in all disciplines of silicone fabrication, calendaring, dip coating, extruding and molding. Service includes exacting tolerances, flash free parts, process qualification/validation and lean manufacturing within our class 10,000 cleanrooms.
SPT - Small Precision Tools
1330 Clegg Street
Petaluma, CA 94954
Phone: (707) 762-5880
Fax: (707) 778-2271
Web: www.spt-cim.com
E-mail: cim@sptca.com
Contact: Travis Ayers
Services: Ceramic injection molding, micro EDM of ultra-hard materials.
Synovis Interventional Solutions, Inc.
475 Apollo Drive
Lino Lakes, MN 55014-1093
Phone: (651) 792-8500
Fax: (651) 792-8600
Web: www.synovismed.com
E-mail: info@synovismed.com
Contact: JoAnn Falkers
Services: Manufacturing Medical Innovation.
At plants in Minnesota and Puerto Rico, we offer a broad spectrum of contract manufacturing services including wire coiling, forming and grinding; machining—including Swiss, CNC milling and turning, and EDM; plastic injection molding; laser processing and welding; joining, assembly and packaging. Applying our proprietary processes and patented technologies we manufacture products that move the medical industry forward. Consider us your source for medical device manufacturing and innovation.
The Tech Group
14677 N. 74th Street
Scottsdale, AZ 85260
Phone: (480) 281-4500
Fax: (480) 281-4503
Web: www.techgroup.com
E-mail: sales@techgroup.com
Products and Equipment: The Tech Group has established a reputation as a global leader in partnering with the world’s largest OEMs and providing them with on-time development and commercialization of their medical and drug delivery devices. With facilities throughout the Americas, Europe and Asia, we offer global engineering driven custom molding and contract manufacturing solutions for the medical and pharmaceutical industries worldwide. Facilities are FDA registered, ISO certified (9001:2000) and cGMP compliant. The Tech Group is a Class II and III medical device manufacturer committed to producing the highest quality injection molded components and devices. Contract manufacturing projects range from product design refinement and development, tool design and fabrication, process design, validation and production. The company also offers OEMs value-added services such as multi-component molding, class 10,000 and 100,000 cleanroom molding device assembly and packaging solutions. Major markets include: medical device, drug delivery, pharmaceutical, diagnostics and hospital product
UFE Incorporated
1850 South Greeley Street
Stillwater, MN 55082-0007
Phone: (651) 351-4273
Fax: (651) 351-4272
Web: www.ufeinc.com
E-mail: ask@ufeinc.com
Contact: Steve Druley
Services: UFE is an award-winning manufacturing resource with strong capabilities throughout the development and production continuum—from product engineering through contract assembly, inlcuding the critical thermoplastic injection molding and mold manufacturing capabilities required to produce medical products cost-effectively with continuous, flawless quality.
Comments: UFE provides engineered manufacturing solutions that meet the most demanding needs of medical device manufacturers. Domestic and foreign facilities are scalable to a wide volume range and all are certified to ISO 9001:2000 standards.
Upchurch Medical
619 Oak Street
Oak Harbor, WA 98277
Phone: (800) 372-6042 toll free; or (360) 679-8718
Fax: (800) 359-3460 toll free; or (360) 679-3830
Web: www.upchurchmedical.com
E-mail: upchurchmedical@idexcorp.com
Contact: Kristie Lloyd
Comments: Upchurch Medical is a contract manufacturer of medical device implant, disposable and instrument components from high performance thermoplastic materials. We injection mold, extrude, precision machine and assemble as well as manufacture in a clean room environment. We specialize in custom tubing and device components used across applications such as orthopedics, cardiovascular, endoscopy and radiology. Visit www.upchurchmedical.com to learn more about our comprehensive capabilities.
Upchurch Scientific
619 Oak Street
Oak Harbor, WA 98277
Phone: (800) 426-0191
Fax: (800) 359-3460
Web: www.upchurch.com
Contact: Karen Boldra
Products & Equipment: Precision injection molding of tight-tolerance configurations. Shot capacity up to 4 ounces. Insert molding options. Microprocessor-controlled molding machines. Short-run tooling and manufacturing: as few as 100 parts/year. Custom compounding.
Services: Industry-leading expertise in the use of high performance engineering thermoplastics. More than 15 years' experience building injection molds for exotic resins. To specification design and preproduction development. Prototype and market entry tooling and production. Product assembly and custom kits, packaging and labeling SPC capable. Complete traceability available. JIT environment & VMI stocking options available. Strategic alliance partnerships with leading chemical manufacturers
Comments: More than 75% of our products are custom-designed to OEM specifications. Fittings for high, medium & low pressure applications, adapters and couplers, unions, manifolds, flow control components and assemblies, back-pressure regulators, filters and microfilters, frits and mixers
Vaupell, Inc.
1144 N.W. 53rd Street
Seattle, WA 98107
Phone: (206) 784-9050
Fax: (206) 783-9062
Web: www.vaupell.com
E-mail: mhamm@vaupell.com
Products and Equipment: Implantable and bio-absorbable devices, fully automated systems, rapid prototypes.
Services: Injection molding in clean rooms to ISO 13485:2003, rapid prototyping, precision machining, tooling and assembly.
Comments: Vaupell offers integrated product development from desgn, material selection, prototypes, molding, assembly and final production. We have facilities throughout the United States and in Southern China.
Vesta, Inc.
5400 West Franklin Drive
Franklin, WI 53132
Phone: (414) 423-0550
Fax: (414) 423-0562
Web: www.vestainc.com
E-mail: sales@vestainc.com
Contact: Charles Heide
Products & Equipment: Seals, connectors, septums, balloons, caps, sleeves, peristaltic pump tubing, suture clips, valves. Equipment: 47 presses and proportioning and mixing systems, and robot. Optical and digital vision units, dual axis laser systems, gauge checking equipment, Integrated Business and Engineering networks. Quality Assurance, Control and Validation.
Services: Silicone rubber custom molded products, extrusion and fabricated assemblies
Comments: Silicone rubber custom molded products, extrusion and fabricated assemblies including long-term implants. We produce in quantities from hundreds to the millions. Our secondary services include semi to fully automated capability in slitting, punching, hole drilling, tip cutting, skiving, notching and tipping.