Michael Barbella, Managing Editor02.01.21
Researchers in the United Kingdom and United States have developed a new material with promising soft tissue repair abilities.
The team - comprised of researchers from the University of Birmingham and Duke University - have fine-tuned a new thermoplastic biomaterial whose degradation rate and mechanical properties can be controlled independently.
A type of polyester, the new material has been designed for use in soft tissue repair or flexible bioelectronics. Materials that successfully replicate the necessary elasticity and strength of biological tissues but also biodegrade over an appropriate timescale are extremely difficult to engineer. This is due to the fact that chemistry used to produce a material’s mechanical properties will also typically govern the rate at which it degrades.
In a new advance, the team has now shown how the addition of succinic acid – a product found naturally within the body – can be used to control the degradation rate.
In a new study published in Nature Communications, researchers showed how the polyester biomaterial degrades gradually over a period of four months, with healthy tissues growing into and eventually replacing the implant. Tests in rats were also carried out to confirm the material’s biocompatibility and safety.
Study co-author Professor Andrew Dove explained: “Biological tissues are complex with varying elastic properties. Efforts to produce synthetic replacements that have the right physical characteristics and that can also degrade in the body have been ongoing for decades. Part of the challenge is that a ‘one-size-fits-all’ approach doesn’t work. Our research opens up the possibility of engineering biological implants with properties that can be fine-tuned for each specific application.”
By varying the amounts of succinic acid the team could control the rate at which water penetrates the material and hence the degradation speed. Usually, the structural changes that increase degradation speed would cause a loss of strength, but this material has been designed with specific stereochemistry that mimics natural rubber and allow its mechanical properties to be finely controlled. This means any loss of strength can be compensated for by making suitable stereochemical adjustments. This is a significant advance that has so far not been achieved in any other degradable biomaterial.
Professor Matthew Becker, who holds dual appointments in chemistry and mechanical engineering and materials science at Duke, noted that the biomaterials and regenerative medicine communities have been severely limited to a few materials which lack the diversity of properties reported in this study. “The materials we have developed offer a real advance in the ongoing search for new biomaterials. The tunable nature of the material makes it suitable for a range of different applications, from replacement bone to vascular stents to wearable electronics. Additional work to prove the biocompatibility of the material and its use in more advanced demonstration is ongoing.”
The research was funded by the National Science Foundation, the John S. and James L. Knight Foundation, the European Research Foundation, and the National Health and Medical Research Council of Australia.
The technology is the subject of international patent applications filed by the University of Warwick and Akron University.
The team - comprised of researchers from the University of Birmingham and Duke University - have fine-tuned a new thermoplastic biomaterial whose degradation rate and mechanical properties can be controlled independently.
A type of polyester, the new material has been designed for use in soft tissue repair or flexible bioelectronics. Materials that successfully replicate the necessary elasticity and strength of biological tissues but also biodegrade over an appropriate timescale are extremely difficult to engineer. This is due to the fact that chemistry used to produce a material’s mechanical properties will also typically govern the rate at which it degrades.
In a new advance, the team has now shown how the addition of succinic acid – a product found naturally within the body – can be used to control the degradation rate.
In a new study published in Nature Communications, researchers showed how the polyester biomaterial degrades gradually over a period of four months, with healthy tissues growing into and eventually replacing the implant. Tests in rats were also carried out to confirm the material’s biocompatibility and safety.
Study co-author Professor Andrew Dove explained: “Biological tissues are complex with varying elastic properties. Efforts to produce synthetic replacements that have the right physical characteristics and that can also degrade in the body have been ongoing for decades. Part of the challenge is that a ‘one-size-fits-all’ approach doesn’t work. Our research opens up the possibility of engineering biological implants with properties that can be fine-tuned for each specific application.”
By varying the amounts of succinic acid the team could control the rate at which water penetrates the material and hence the degradation speed. Usually, the structural changes that increase degradation speed would cause a loss of strength, but this material has been designed with specific stereochemistry that mimics natural rubber and allow its mechanical properties to be finely controlled. This means any loss of strength can be compensated for by making suitable stereochemical adjustments. This is a significant advance that has so far not been achieved in any other degradable biomaterial.
Professor Matthew Becker, who holds dual appointments in chemistry and mechanical engineering and materials science at Duke, noted that the biomaterials and regenerative medicine communities have been severely limited to a few materials which lack the diversity of properties reported in this study. “The materials we have developed offer a real advance in the ongoing search for new biomaterials. The tunable nature of the material makes it suitable for a range of different applications, from replacement bone to vascular stents to wearable electronics. Additional work to prove the biocompatibility of the material and its use in more advanced demonstration is ongoing.”
The research was funded by the National Science Foundation, the John S. and James L. Knight Foundation, the European Research Foundation, and the National Health and Medical Research Council of Australia.
The technology is the subject of international patent applications filed by the University of Warwick and Akron University.