Greenville, DE — Servo2Go.com has just added Galil Motion Control’s New PCI BUS Econo Motion Controller, the DMC-1417, to its broad range of high performance cost effective PCI based Motion controllers.
The DMC-1417 can handle the most demanding applications with such features as an extra encoder input for electronic gearing, program memory with multitasking, uncommitted I/O and user-selectable stepper or servo motor control. Modes of motion include point-to-point positioning, jogging, contouring, electronic gearing and e-cam.
Programming the DMC-1417 is simplified with two-letter, intuitive commands and a full set of software tools such as WSDK for servo tuning and analysis, ActiveX Tool Kit for Visual Basic users and a C-Programmers Tool Kit. The Econo Series controllers do not include uncommitted analog inputs and are not optoisolated. Use the DMC-1810 Optima controller if you require these features. Features include:
· Accepts up to 8 MHz encoder frequencies for servos and 2 MHz for steppers
· Advanced PID compensation with Velocity and Acceleration feed forward and integration limits
· Modes of motion include jogging, point-to-point positioning, contouring, electronic gearing and ECAM
· Multitasking for concurrent execution of two application programs
· Memory for application programs, variables and arrays
· Accepts inputs from two encoders for gearing or dual-loop applications
· 7 Uncommitted digital inputs, 3 digital outputs
· High Speed position capture · Forward and reverse limits and home input
· Sinusoidal commutation for brushless servo motors
· 37-Pin D-type connector
· Custom hardware and firmware options available
More information on the DMC-1417 PCI Motion Controller from Servo2Go.com can be viewed at-
http://servo2go.com/product.php?ID=100011
An abridged copy of this Press Release can be viewed online at –
http://servo2go.com/news.php?id=84
For more information, please contact:
EDITORIAL CONTACT:
Warren Osak
warren@servo2go.com
Toll Free Phone: 877-378-0240
Toll Free Fax: 877-378-0249
www.servo2go.com
The DMC-1417 can handle the most demanding applications with such features as an extra encoder input for electronic gearing, program memory with multitasking, uncommitted I/O and user-selectable stepper or servo motor control. Modes of motion include point-to-point positioning, jogging, contouring, electronic gearing and e-cam.
Programming the DMC-1417 is simplified with two-letter, intuitive commands and a full set of software tools such as WSDK for servo tuning and analysis, ActiveX Tool Kit for Visual Basic users and a C-Programmers Tool Kit. The Econo Series controllers do not include uncommitted analog inputs and are not optoisolated. Use the DMC-1810 Optima controller if you require these features. Features include:
· Accepts up to 8 MHz encoder frequencies for servos and 2 MHz for steppers
· Advanced PID compensation with Velocity and Acceleration feed forward and integration limits
· Modes of motion include jogging, point-to-point positioning, contouring, electronic gearing and ECAM
· Multitasking for concurrent execution of two application programs
· Memory for application programs, variables and arrays
· Accepts inputs from two encoders for gearing or dual-loop applications
· 7 Uncommitted digital inputs, 3 digital outputs
· High Speed position capture · Forward and reverse limits and home input
· Sinusoidal commutation for brushless servo motors
· 37-Pin D-type connector
· Custom hardware and firmware options available
More information on the DMC-1417 PCI Motion Controller from Servo2Go.com can be viewed at-
http://servo2go.com/product.php?ID=100011
An abridged copy of this Press Release can be viewed online at –
http://servo2go.com/news.php?id=84
For more information, please contact:
EDITORIAL CONTACT:
Warren Osak
warren@servo2go.com
Toll Free Phone: 877-378-0240
Toll Free Fax: 877-378-0249
www.servo2go.com