Sponsored
released by
Confluent Medical Technologies
04.30.24
Tubing & Extrusion
Business Process
-
Tubing & Extrusion
Cobalt Polymers Partners with HnG Medical
The two companies enter a distribution agreement to expand access to heat shrink tubing in Asia.Rachel Klemovitch, Assistant Editor 05.01.24
-
Materials | Tubing & Extrusion
Will You Experience a Catheter Material Supply Challenge?—A Medtech Makers Q&A
Getting ahead of any ban on NMP-based materials will alleviate potential delays or problems with manufacturing later.
-
Tubing & Extrusion
Medical Tubing & Extrusion Experts Offer Perspectives on Industry
Over a dozen medical tubing and extrusion experts offer their perspectives on the industry.Sam Brusco, Associate Editor 04.04.24
-
Packaging & Sterilization | Tubing & Extrusion
Spectrum Plastics to Expand Costa Rica Facility
The expansion will add sterile DuPont Tyvek medical packaging capabilities and expand the company's medical tubing operation in Costa Rica.Sam Brusco, Associate Editor 02.15.24
-
Tubing & Extrusion
MD&MW News: Junkosha Launches Peelable Heat Shrink Tubing
Company’s newest 1.8:1 shrink ratio PHST for catheter manufacturers.Rachel Klemovitch, Assistant Editor 02.06.24
-
Tubing & Extrusion
Medical Extrusion Technologies Partners with Chamfr to Offer FEP Heat Shrink
Medical Extrusion Technologies offers over 30 sizes of FEP heat shrink on the Chamfr platform.Rachel Klemovitch, Associate Editor 02.02.24
-
Tubing & Extrusion
Keystone Medical Technologies Opens Manufacturing Facility in Chattanooga, TN
The new facility focuses on the production of filmcast tubing.Charles Sternberg, Associate Editor 12.05.23
-
Tubing & Extrusion
PTFE-Coated Products for Steerable Catheters—5Qs at Medica/CompaMed 2023
Applied Plastics, a medical coating supplier, will feature its new PTFE Natural Coated Ablated Pull Wires.Online Exclusives Sean Fenske, Editor-in-Chief 11.13.23
-
Tubing & Extrusion
Guidewire and Catheter Manufacturing for Europe—5Qs at Medica/CompaMed 2023
Expansion plans in Ireland will enable increased capacity to serve neurovascular, structural heart, electrophysiology, and peripheral vascular products.Online Exclusives Sean Fenske, Editor-in-Chief 11.13.23
-
Tubing & Extrusion
Regional Extrusion, Thermoplastic Molding, and Catheter Offerings—5Qs at Medica/CompaMed 2023
With manufacturing locations on four continents, the firm can provide solutions for a variety of needs to customers around the world.Online Exclusives Sean Fenske, Editor-in-Chief 11.13.23
-
Tubing & Extrusion
Mandrel Development for Catheter Fabrication—5Qs at Medica/CompaMed 2023
Wytech Industries and Mountain Manufacturing Technologies join forces to tackle challenges of mandrel development and manufacture.Online Exclusives Sean Fenske, Editor-in-Chief 11.13.23
-
Tubing & Extrusion
TekniPlex Healthcare Expands Production Facility in Cartago
Extends its ability to produce and deliver complex medical device assemblies that meet and exceed stringent requirements.Charles Sternberg, Associate Editor 11.06.23
-
Tubing & Extrusion
Junkosha Unveils New Large Size Peelable Heat Shrink Tubing for Catheter-Based Procedures
Introduces the new range at MD&M Minneapolis.Charles Sternberg, Associate Editor 10.09.23
-
Tubing & Extrusion
Freudenberg Medical Opens New Galway, Ireland Facility
The company said the expanded manufacturing footprint will bring 100 new jobs to the Galway area.Sam Brusco, Associate Editor 10.02.23
-
Tubing & Extrusion
Zeus Introduces Absorv XSE Oriented Tubing
Provides a customizable platform for design and offers an alternative to metallic products implanted permanently in the human body.Charles Sternberg, Associate Editor 09.27.23
-
Tubing & Extrusion
Exceeding Medical Device Extrusion Expectations
Suppliers are finding new and creative ways to address the ever-increasing demands of medical device OEMs seeking extruded solutions.Mark Crawford, Contributing Editor 09.25.23
-
Tubing & Extrusion
Meeting Quality Requirements for Unspecified Details for Extrusions—A Medtech Makers Q&A
Experience and expertise prove to be critical when working with a customer who hasn’t provided a complete design for an extruded part.
-
Tubing & Extrusion
Confluent Medical Technologies Offers REACH and EU MDR Compliant Polyimide Tubing
Confluent’s Polyimide is made with no restricted substances.Charles Sternberg, Associate Editor 06.12.23
-
Tubing & Extrusion
Freudenberg Medical Implements Virtual Reality Training for Employees
Ensures employees have the necessary skills to meet the high-quality standards in catheter manufacturing for customers worldwide.Charles Sternberg, Associate Editor 06.01.23
-
Tubing & Extrusion
Pushing the Boundaries on Next Gen Medical Tubing—A Medtech Makers Q&A
As device innovation continues, so to must the evolution of the components contained within.
