Andrew+ is part of the company’s OneLab, cloud-connected ecosystem that allows users to design and execute laboratory protocols easily and effectively. This flexible architecture enables users to effortlessly transition from laborious manual pipetting procedures to error-free, fully-robotized lab workflows. The best part is that users don’t have to be experienced programmers or be experts in laboratory robotics or automation engineering.
This liquid-handling robot’s base unit weighs only 35 pounds for easy benchtop use, and can be redeployed to different parts of a laboratory or different departments to be used for a wide variety of tasks. The robot works from an integrated tool wrack. The robot grabs and secures the proper tool for the operation and then performs the allotted function. Andrew+ is a modular system that can be adapted to many tasks and applications, including sample prep for QC, analytical chemistry, serial delusion, plasma prep, DNA extraction, concentration normalization, and so much more. Through the use of single and multichannel electronic pipettes, the system ensures liquid handling performance while delivering maximum flexibility to the user. In addition, the unit can perform a wide range of complex experimental steps, such as column grabbing, depending on the application.
The pipettes offer speed and dynamic range of dispensing volumes from 0.2 µL up to 10 mL (see Figure 2). As the unit has been designed to fit most laboratory benches and biosafety cabinets, flexibility is built-in. The unit can operate with two full rows of Dominos (allowing for 7 microplates or 56 falcon tubes or 168 mcrotubes and occupies a depth of ~60cm/24-inch—that fits even the smallest hoods. The compact size of the unit allows it to be located in a refrigerator and work at temperatures as low as 4oC.
Three-Joint Robotic Actuation
Andrew Alliance chose three EC45 Flat motors designed and manufactured by maxon for the robot arm actuation—one each for the shoulder, elbow, and wrist. According to Antoine Jordan, Global Operations Director, “The size and footprint were really important to keep the robot both compact and lightweight.”
The company has used maxon products in the past, which allowed the company to have plenty of prior experiences with the motor technology before incorporating them into this new design. Impressed by the motors’ stability and maxon’s broad line of products compatible with a wide number of applications allowed for complete design flexibility for the project. Andrew Alliance also felt like they could trust using a minimally customized version of the motors for their application if necessary.
Once the decision on which motors to use was finalized, the design parameters were tightened so that the end result would allow them to produce a highly accurate, precision system. Because accuracy is so important in an automated lab robot, the design included an integrated absolute encoder used for the system’s closed loop operation. This helped to provide and maintain the precision necessary for the final application. The robot required this extremely accurate operation for both key operations—to make precise movements while picking up the various instruments or tools, as well as performing the operation required once the tool was in the robot’s grip.
The Right Motors
Deciding to incorporate the EC45 Brushless DC Flat motors was one of the critical decisions made for the application (see Figure 3). Besides the precision necessary for operation, the motors needed to be very quick to respond throughout the entire move sequence. Dependent upon where the robotic arm is located at any one moment, greater torques were required, particularly for cantilevered operations. Sensors integrate with the system controls to make sure that the homing of the arm is performed without touching any other system components.
The motors are 4-pole brushless units that are electronically commutated, thus enabling extremely long motor life and low-noise operation. By incorporating high-energy neodymium magnets, the motors are very responsive while minimizing overall size. Continuous output power is 200 watts, while the maximum speed is 12,000 rpm and maximum continuous torque is up to 265 mNm (37 oz-in) depending on the winding.